REQUEST FOR INFORMATION (RFI)- KNEE MILLING MACHINE
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159750896262630 |
Posted Date: | Mar 8, 2023 |
Due Date: | Mar 22, 2023 |
Solicitation No: | HT9425-23-BH-KMM |
Source: | https://sam.gov/opp/8b3ec204b2... |
- Contract Opportunity Type: Special Notice (Original)
- All Dates/Times are: (UTC-05:00) EASTERN STANDARD TIME, NEW YORK, USA
- Original Published Date: Mar 08, 2023 08:07 am EST
- Original Response Date: Mar 22, 2023 02:00 pm EDT
- Inactive Policy: 15 days after response date
- Original Inactive Date:
-
Initiative:
- None
- Original Set Aside:
- Product Service Code: 3417 - MILLING MACHINES
- NAICS Code:
-
Place of Performance:
Frederick , MD 21702USA
Warfighter Health, Performance and Evacuation Project Management Office (WHPE PMO) of the US Army Medical Materiel Development Activity (USAMMDA) has a requirement to purchase a CNC Knee Milling Machine and additional services as described below:
Task 1: Contractor will provide a CNC Knee Milling Machine that meets the minimum essential characteristics listed below:
Option 1:
Overview
- System will consist of a Bridgeport Series 1 Knee Mill with a 3 Axis CNC Upgrade Kit and Controller installed.
CNC Upgrade Kit and Controller
- Z Axis CNC Control on Knee
- X, Y Axis CNC Control on Table
- Spindle Speed CNC Controlled (Variable Frequency Drive)
- Pendant Hand Wheel
- Ball Screws (X and Y Axes)
- M Function
- Conversational Programming
- Programable Flood Coolant with Manual Control Button on Controller
- X Axes Travel: approx. 36 inches
- Y Axes Travel: approx. 12 inches
- Z Axes Travel: approx. 16 inches
- 220 Single Phase Power
- Full Axes Simultaneous Control
- DRO Mode
- Braking Resistor
- Connection on Controller for HAAS Rotary Table Model HRT 210 P1
Knee Mill
- Model: Bridgeport Series 1 Knee Mill with all Standard Features
- Erickson #30 Quick Change Spindle
- Power Drawbar for 30 QC Spindle
- Table Size: 49 inches x 9 inches
- Turret Boom Out: 12 inches
- Turret Rotation: 360 Degrees
- Head Rotation Side to Side: 360 Degrees
- Head Tilt (UP): 45 Degrees
- Coolant Collection Tray with Coolant Pump
- Automatic Lubrication System for CNC applications
Other
- The CNC Knee Mill System should come with an operation and maintenance manual, accessories, and a parts list of all supplies/items that accompany the system.
- Ability To Lift Machine from Bottom (forklift)
- One Year Warranty, Parts & Labor (min.)
- Documentation/Manuals That Cover: Programming, Operating, Maintenance, Parts, Electrical Schematics
Task 2: Contractor will setup / install machine at Fort Detrick.
Task 3: Contractor will complete diagnostic and performance verification that the equipment is in proper working order during setup.
Task 4: Contractor will demonstrate basic use of machining center to operator on-site at Fort Detrick, MD.
Please review attachment, "RFI_CNC Knee MIlling Machine_Final" for more information.
- Mar 08, 2023 08:07 am ESTSpecial Notice (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.