Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

USCGC SEQUOIA (WLB 215)

SPECIFICATION FOR FABRICATION OF WATERTIGHT AND NON-WATERTIGHT DOORS, HATCHES, AND SCUTTLES

FY2023

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 225-WLB-167-001, rev W; Structural Closures

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

OTHER REFERENCES

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment

Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting

Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure

The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning

USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023

5 (Rev-0)

WORK ITEM 1: Fabrication of Watertight and Non-Watertight Doors, Hatches, and Scuttles

1. SCOPE

1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non-water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references.

TABLE 1 - WATERTIGHT DOORS AND SCUTTLE LOCATIONS

Description

Location

P/N and Description

QTY

Drawing

Watertight Hatch

01-103-2

Deck Gear STRM

01-56-0-D

17

Watertight Hatch - 30”x 30” Clear Opening (C.O.), Raised, 8 dogs, with 21” C.O. watertight scuttle.

01 Each

225-WLB-167-001

Watertight Door

1-57-2

Buoy Deck

1-57-2-L

27

Watertight Door - 36” x 66”, quick acting, Left Hand, 10 Dog, W/Hasp and Staple, 9” diameter (DIA) fixed light, Low type CRES hinges

01 Each

225-WLB-167-001

Watertight Door

1-66-2

Crew Mess

1-66-0-L

14

Watertight Door - 36”x 66”, quick acting, Right Hand, 10 Dog, W/Hasp and Staple, 9” DIA fixed light, Low type CRES hinges

01 Each

225-WLB-167-001

USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023

6 (Rev-0)

Watertight Hatch

01-93-0

Passageway

1-92-0-L

2

Watertight Hatch – 36” x 72” C.O. (spring assisted), Raised, Individually dogged, W/25” DIA C.O. Quick Acting Watertight Scuttle

01 Each

225-WLB-167-001

Weathertight Door

03-62-2

Pilot House (Port)

03-56-0-C

21

Weathertight Door – 26” x 66” C.O., Left Hand. W/14” x 18” C.O. Window, W/Lever Type Knobs and Mortise Locks

01 Each

225-WLB-167-001

Weathertight Door

03-62-1

Pilot House (Starboard)

03-56-0-C

22

Weathertight Door – 26” x 66” C.O., Right Hand. W/14” x 18” C.O. Window, W/Lever Type Knobs and Mortise Locks

01 Each

225-WLB-167-001

Watertight Hatch

1-61-2

Passageway

2-57-0-L

2

Watertight Hatch – 36” x 72” C.O. (spring assisted), Raised, Individually dogged, W/25” DIA C.O. Quick Acting Watertight Scuttle

01 Each

225-WLB-167-001

Weathertight Door

1-25-2

ATON Shop

1-21-2-Q

11

Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9”

01 Each

225-WLB-167-001

USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023

7 (Rev-0)

DIA Fixed Light

Weathertight Door

01-67-4

PFD Locker

01-66-2-L

10

Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9” DIA Fixed Light, Low Level CRES Hinges

01 Each

225-WLB-167-001

Weathertight Door

02-77-4

PFD Locker

02-75-2-Q

19

Weathertight Door – 26” x 66” C.O., Left Hand. W/Hasp and Staple

01 Each

225-WLB-167-001

Watertight Door

1-25-1

1-21-1-L

10

Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9” DIA Fixed Light, Low Level CRES Hinges

01 Each

225-WLB-167-001

Weathertight Door

02-90-1

Incinerator Room

02-85-0-Q

20

Weathertight Door – 26” x 66” C.O., Right Hand. W/Hasp and Staple

01 Each

225-WLB-167-001

1.2 Government-furnished property

None

2. REFERENCES

COAST GUARD DRAWINGS

Coast Guard Drawing 225-WLB-167-001, rev W; Structural Closures

COAST GUARD PUBLICATIONS

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements

USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023

8 (Rev-0)

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

OTHER REFERENCES

Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting

Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal

3. REQUIREMENTS

3.1 General.

3.1.1 CIR.

None.

3.1.2 Tech Rep.

Not applicable.

3.1.3 Protective measures. Not Applicable

3.1.4 Interferences. Not Applicable

3.1.5 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes

3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC SEQUOIA, CO LT Clara Ashton and CWO Michael Scalia, Surface Forces Logistics Command, 2401 Hawkins Point Road, Baltimore, MD, 21226-1797, Building 58.